Prestigious Textiles Porthole Sand Roller Blind

Prestigious Textiles Porthole Sand Roller Blind. Porthole is a spotty design.

* Contact us for a quote. Please provide following information:

If possible use a metal measuring tape for accuracy.

Provide all measurements in mm or cm's.

You will need to know if you want your blinds to sit inside the window frame (inside recess) or outside the window frame (outside recess)

We will need 3 measurements in order to manufacture your blind - Width, Height and Installation Height.

Recess Blinds:

Measure from the inside wall of the window to the other. (At 3 points - Top, Centre, Bottom)
Measure from the inner top of the window to the windowsill. (At 3 points - Left, Centre, Right)
Measure from the top of the window frame to the floor, this will determine the length of your chain as it will need to adhere to the child safety guidelines.

Outside Blinds:

Measure the full width you want the blind to cover (The exact width refers to overall bracket to bracket size,)
Measure the length you require overall, including the top fittings and the required overlap past the windowsill (Remember to allow for any obstacles or obstructions beneath the window. It is recommended 10cm above and below your window opening)
Measure from where you are wanting to fit the blind to the floor, this will determine the length of your chain as it will need to adhere to the child safety guidelines.

When measuring for roller blinds, the exact width refers to the overall bracket to bracket size. The cloth or fabric width will be 3cm narrower than the exact width (which includes the brackets).

If you prefer, there is also a roller blind-only option to order 'cloth width' but remember that you must have the space to fit your brackets, which will add 3cm to your cloth size.

Compare Products